Cryolipolysis slimming Machine Supplier / Manufacturer Nubway Company
Cryolipolysis slimming Machine Supplier / Manufacturer Nubway Company
Add to Cart
laser diode hair removal
1. Working Principle
Diode laser hair removal technology is based on the selective dynamics of light and
heat. The laser goes through the skin surface to reach the root of hair follicles, light
can be absorbed and converted into heat damaged hair follicle tissue. So that hair loss
regeneration without injury surrounding tissue. With slight pain, this is the most the
safest, quick, and permanent technique for hair removal now.
2. Technical Parameter
| Laser type | Semiconductor laser |
| wavelength | 808 nm |
| Output Mode | pulse output |
| Control Method | Touch control |
| Screen Size | 10.4 Inch |
| Energy density | 20-70J/cm2 (Deviation≤±2%) |
| Pulse width range | 1-400ms |
| Spot size | 12*20mm |
| Frequency | 1-10HZ |
| Light spot surface temperature | 0-30℃ |
| Cooling System | Semiconductor+built-inwater+Air Cooling triple cooling systems |
| Dimension | 450×450×1160mm |
| Net weight | 35kg |
| Fuse specification | Ø5×2510A |
| Input Power | 1800W |
| Power | AC220V±10% 10A 50HZ , 110v±10% 10A 60HZ |
3. Treatment
1. Hair removal for all skin types, cause the wavelength is near infrare, so it won't cause skin damage for dark skin type, and with long pulse width, even the darker skin can get good treating result.
2. Skin rejuvenation.
4. Advantages
1), Handle and Pipe
10 Germany “Dilas”laser bar inside,60w for each total power can reach 600W.
High quality Medical pi pe for water circulation,soft with good flexibility,durable.
2), Big spot Size
12*20mm big spot,quicker your treatment time.Nubway spot size is exclusive in China
3), Big Output Energy
Max laser total output energy can reach 168J,average 70J/cm2 on the skin,effective result confirmed
4), Strong Cooling system
Semiconductor+ Water+ Air Cooling triple cooling systems
10L big water tank, booster pump ,which can output 6.5L water per min, high lift can reach 60 meter, ensure good water circulation;
2 big Copper Radiator ,better heat conduction than the Aluminum ;4 big DC fan 12V, big wind , the heat can be soon disappeared ,also low power , low noise.
Strong cooling system guarantee our machine can working continues 12 hours more
5), Main power supply
Our main power supply is special custom-made , which is totally fit for this machine , not the general power.
The output current is constant current , which will avoid the damage to the bar as the electric current is too strong. But many manufacturer just use the ordinary magnetic drive pump , it will usually led the strong current directly to damage the bar.